|
|
PCM PRO - Balancer with lights New!
|
|
Number of cells |
2,3,4 Li-Poly Cells |
|
Input |
4 Cells LiPo Charger
Max approx. 5A |
|
Output |
Max. 16.8V |
|
Balancer |
Yes w/LED |
|
Balance Current |
180mA |
|
Protect Voltage |
4.3V ¡À0.025V / Cell |
|
Weight |
16g |
|
Dimensions |
50(L) x 37(w) x 8(H)mm | |
.jpg)
Click to enlarge
|
| |
|
-
The PCMPRO can be able to use for 2-4 LiPo batteries, The Balancing Port is compatible with Xpower series, 3S and 4S batteries could be linked by switching wires(Click to view).
-
If the voltage of any cell is over 4.200V, the balancing function will be started, and the LED will be light, which is said the process of balancing is working.
-
It can provide Max. 180mA balancing current, with large areas heat releasing.
-
If the voltage of any cell is over 4.300V, The PCMPRO will Cut off whole charging circuit.
-
The size of PCMPRO is very little and very convenient for carrying. It can be linked to JoyCharger and any other brands LiPo Chargers. |
PCM2S/3S/4S - Protection Circuit Module HOT!
|
|
Click to enlarge |
|
Model |
PCM2S |
PCM3S |
PCM4S new! |
|
Number of cells |
2Cells |
3Cells |
4Cells |
|
Input |
2 Cells LiPo Charger |
3 Cells LiPo Charger |
4 Cells LiPo Charger |
|
Output |
Max. 8.4V |
Max. 12.6V |
Max. 16.8V |
|
Charging Current |
Max. 5A |
|
Protect Voltage |
4.3V ¡À0.03V / Cell |
|
Balance |
No |
Yes |
Yes |
|
Weight |
7.6g |
8.2g |
10g |
|
Dimensions |
38(L) x 23(W) x 5(H)mm |
OC305ADJ JOYCHARGER Automatic Outdoor Charger (Discontinued)
|
|
Type of battery |
Li-Polymer/NiCd/NiMH |
|
Input |
DC 11V to 15V
Max approx. 3A |
|
Number of cells |
1-3 Li-Poly Cells
1-8 NiCd/NiMH Cells |
|
Charge Voltage |
Li-Poly: 4.2V,8.4V,12.6V
NiCd/NiMH: Automatic |
|
Charge Current |
0.3A,0.6A,1.2A,2A |
|
Weight |
80g |
|
Dimensions |
92(L) x 55(w) x 12(H)mm | |
Click to enlarge
|
| |
|
-
Constant voltage or constant current (CVCC) configuration optimally charges Lithium-Polymer battery cells.
-
High frequency switch mode topology is adopted to achieve high efficiency, small size, cool temperature and lightweight.
-
Reverse polarity protection both at input and output is provided.
-
Low-voltage detection circuit enables a wake up charge source of 30mA automatically to precondition a deeply discharged pack when the cell voltage drops below a preset limit.
-
Two LEDs in red and green are used to indicate information of charging modes and alarms. |
|
| |
|
|
